(800) 994-6164Mon–Fri: 8AM – 5PM EST
(800) 994-6164
Mon–Fri: 8AM – 5PM EST
Request a Quote
Commercial heat pump water heater installation by ICA Heating in NJ
P-K EvoHP & Robur Authorized Dealer

Heat Pump Water
Heaters

ICA Heating offers two paths to high-efficiency heat pump DHW — the Patterson-Kelley EvoHP electric air-to-water heat pump and Robur gas-fired absorption technology. Factory-authorized sales, engineering, installation, and service across New Jersey and New York.

400%COP 4.0 Efficiency
-30°FMin. Ambient
8xCascade Capacity
24/7Emergency Service
Heat Pump DHW Solutions

The Future of
Commercial Water Heating

Heat pump water heaters deliver dramatically higher efficiency than conventional gas or electric resistance systems — extracting heat from ambient air and transferring it to water at efficiencies up to 400%. For commercial facilities in NJ and NY facing electrification mandates, carbon reduction targets, or simply rising energy costs, heat pumps represent the most impactful upgrade available.

ICA offers two distinct heat pump platforms: the Patterson-Kelley EvoHP for all-electric and hybrid applications, and Robur gas-fired absorption heat pumps for facilities where electrical infrastructure upgrades are impractical. Both deliver exceptional efficiency with minimal maintenance.

Our engineers design complete heat pump systems — from load analysis and equipment sizing through hybrid boiler integration, electrical planning, and decades of preventive maintenance.

Electric — P-K EvoHP
Air-to-water heat pump with COP 4.0. Operates to -30°F, cascadable to 8 units, hybrid-ready with existing boilers. R32 low-GWP refrigerant available.
Gas-Fired — Robur
Absorption technology using natural gas. No compressors, no refrigerant refills, single-phase power. Heating and cooling from one unit — no cooling towers.
Decarbonization Ready
Both platforms dramatically reduce carbon emissions. Start with a hybrid system today and transition to full electrification when infrastructure allows.
Patterson-Kelley EvoHP

Electric Air-to-Water
Heat Pump

Up to 400% efficiency with COP 4.0. Monoblock design, stepless capacity control, and operation down to -30°F — built for Northeast winters.

Patterson-Kelley EvoHP electric air-to-water heat pump

P-K EvoHP Platform

Patterson-Kelley's entry into building electrification — the EvoHP electric heat pump delivers high-efficiency domestic hot water and comfort heating without combustion. By extracting heat from ambient air, the EvoHP achieves COP 4.0, dramatically reducing energy costs and carbon emissions.

  • Intelligent energy management — automatic load adjustment optimizes efficiency
  • Stepless inverter compressor — smooth 15%–100% capacity without short-cycling
  • 2nd-generation intelligent defrosting — 20% fewer defrost cycles
  • Monoblock design — no field refrigerant work required
  • Low GWP refrigerant options (R32) for environmental compliance
  • Hybrid integration — pairs seamlessly with traditional boiler systems
  • Cascadable up to 8 units for large-scale installations
Electric — R32
EvoHP HP250SW
Single-Wall R32 Heat Pump

The HP250SW is a compact single-wall air-to-water heat pump using R32 low-GWP refrigerant. Ideal for facilities beginning their electrification journey with a single unit or as part of a cascaded system up to 8 units.

  • Refrigerant: R32 (low GWP)
  • Efficiency: Up to 400% (COP 4.0)
  • Output Temp: Up to 140°F
  • Capacity Control: Stepless 15% – 100%
  • Ambient Range: Operates down to -30°F
Electric — R32
EvoHP HP250DW
Double-Wall R32 Heat Pump

The HP250DW features double-wall heat exchanger construction for applications requiring additional separation between refrigerant and water circuits — meeting stricter code requirements while delivering the same COP 4.0 performance.

  • Refrigerant: R32 (low GWP)
  • Heat Exchanger: Double-wall construction
  • Efficiency: Up to 400% (COP 4.0)
  • Output Temp: Up to 140°F
  • Capacity Control: Stepless 15% – 100%
Electric
EvoHP HP500
Mid-Capacity Air-to-Water

The HP500 delivers higher capacity for mid-size commercial DHW and comfort heating applications. Cascadable up to 8 units for large-scale installations, with intelligent energy management that automatically adjusts to partial loads.

  • Efficiency: Up to 400% (COP 4.0)
  • Cascading: Up to 8 units for large-scale systems
  • Output Temp: Up to 140°F
  • Defrosting: 2nd-gen intelligent — 20% fewer cycles
  • Integration: Hybrid-ready with boiler systems
Electric
EvoHP HP700
High-Capacity Commercial

The largest model in the EvoHP family — the HP700 delivers up to 750 MBH per appliance for large commercial DHW and heating loads. Monoblock design simplifies installation with no field refrigerant work required.

  • Capacity: Up to 750 MBH per appliance
  • Efficiency: Up to 400% (COP 4.0)
  • Design: Monoblock — no field refrigerant work
  • Cascading: Up to 8 units together
  • Ambient Range: Operates down to -30°F
Robur

Gas-Fired Absorption
Heat Pumps

No compressors. No refrigerant refills. No cooling towers. Robur absorption technology delivers heating and cooling from natural gas with only three moving parts.

Robur gas-fired absorption heat pump — sold and serviced by ICA Heating

Robur Absorption Technology

Robur manufactures gas-fired absorption heat pumps and chillers that extract heat from external air and transfer it indoors for heating — or reverse the process for cooling. Unlike electric heat pumps, Robur units run on existing natural gas infrastructure, avoiding costly electrical upgrades.

Heating & Cooling

One unit provides both heating and cooling — no separate chiller or cooling tower required. Gas-fired cooling capability included.

Ultra-Simple Design

Only 3 moving elements — no compressors, no engines. Completely closed-loop refrigerant requires zero refills over the system's lifetime.

No Electrical Upgrades

Operates on single-phase power and existing natural gas infrastructure. Eliminates the cost of transformer and electrical panel upgrades.

Clean & Quiet

No CFCs, HFCs, or HCFCs. Low NOx premixed burner technology. Ultra-low noise operation suitable for schools and hospitals.

Interested in heat pump water heating?Our engineers can assess your facility for heat pump viability.
The ICA Advantage

More Than Equipment.
Complete Heat Pump Partnership.

When you buy a heat pump system through ICA, you get factory-authorized support from system design through decades of service — not just a box on a truck.

Authorized Dealer
ICA is an authorized dealer for both Patterson-Kelley and Robur — providing factory-backed sales, engineering, warranty service, and trained startup technicians for both platforms.
Heat Pump System Design
Our engineers design complete heat pump DHW and hybrid systems — including load analysis, equipment sizing, integration with existing boilers, and electrical infrastructure planning.
Installation & Startup
We coordinate delivery, rigging, piping connections, electrical work, controls integration, and factory-authorized startup and commissioning for every heat pump system we sell.
Lifecycle Service & Support
Preventive maintenance programs and 24/7 emergency service for both electric and gas-fired heat pump systems — ICA stays with the system for its full service life.
Decarbonization Planning
ICA helps facilities develop phased decarbonization strategies — from hybrid heat pump/boiler systems today to full electrification when infrastructure and budgets allow.
Specification Assistance
We work with mechanical engineers on heat pump specifications, energy modeling, code compliance, incentive applications, and design-intent alignment for every project.
Applications

Built for Every
Decarbonization Goal

From full electrification to hybrid transitional systems — heat pump water heaters serve the broadest range of commercial applications.

Office Buildings
Electrification & comfort heating
Hospitals & Healthcare
Hybrid heating & DHW
Schools & Universities
Campus decarbonization
Hotels & Hospitality
High-demand DHW
Multi-Family Residential
Central heat pump plants
Water Treatment Plants
Process heat recovery
Industrial Facilities
Process heating & cooling
Sports & Recreation
Pool heating & DHW
Frequently Asked Questions

Common Questions About
Heat Pump Water Heaters

What is a commercial heat pump water heater and how does it work?
A heat pump water heater extracts heat from ambient air (or ground) and transfers it to water — using the same refrigeration cycle as an air conditioner, but in reverse. Electric models like the P-K EvoHP use a compressor and refrigerant, while gas-fired models like Robur use an absorption cycle with natural gas. Both achieve significantly higher efficiency than traditional heating methods.
What's the difference between the P-K EvoHP and Robur heat pumps?
The P-K EvoHP is an electric air-to-water heat pump — it runs on electricity and uses a compressor with refrigerant. The Robur is a gas-fired absorption heat pump — it runs on natural gas with no compressor and only three moving parts. The EvoHP is ideal for electrification mandates and all-electric buildings. Robur is ideal for facilities that want heat pump efficiency without major electrical infrastructure upgrades.
Can the EvoHP operate in cold NJ/NY winters?
Yes. The P-K EvoHP is rated to operate down to -30°F ambient temperature, making it well-suited for the Northeast climate. Its second-generation intelligent defrosting system reduces defrost cycles by over 20% compared to conventional heat pumps, maintaining efficiency even in extreme cold.
What is COP 4.0 and why does it matter?
COP (Coefficient of Performance) of 4.0 means the heat pump produces 4 units of heat energy for every 1 unit of electrical energy consumed — effectively 400% efficiency. By comparison, a traditional electric resistance heater has a COP of 1.0 (100% efficiency), and a high-efficiency gas boiler achieves about 95%. A COP of 4.0 dramatically reduces energy costs and carbon emissions.
Can heat pumps work alongside my existing boiler system?
Absolutely. Hybrid heat pump/boiler systems are one of the most practical paths to decarbonization. The heat pump handles base load and moderate conditions, while the boiler provides supplemental heat during peak demand or extreme cold. The P-K EvoHP is specifically designed for hybrid integration with existing boiler plants.
Why choose a Robur gas-fired heat pump over an electric model?
Robur gas-fired absorption heat pumps are ideal when electrical infrastructure upgrades are prohibitively expensive, when natural gas is readily available, or when you need both heating and cooling from a single unit. They have no compressors (only 3 moving parts), require no refrigerant refills, operate on single-phase power, and eliminate the need for cooling towers. They're especially popular in schools, hospitals, and water treatment plants.
P-K EvoHP & Robur Heat Pumps
Ready for a Heat Pump
Quote or Consultation?